Cara Install Ulang Laptop Asus Windows 7

• Cara Install Ulang Laptop Asus Windows 7
• Cara Install Ulang Windows 7 Pada Laptop Asus
• Cara Install Ulang Laptop Windows 8

Make sure you create your HP Recovery Discs or USB Flash Recovery media before modifying or changing ANYTHING.The screen shots below are from a consumer HP 15t-j100 notebook computer. The options and configuration screens on your business class computer may differ.You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the on the settings page similar to what is shown below, before you can attempt to install Windows 7;After saving the changes, the computer may request that you confirm the changes. Accept the changes by typing the four digit code and pressing the 'ENTER' key.If are you are installing Windows 7 from a USB stick and see a 'Load Driver - a required CD/DVD drive device is missing' message, this is because 'System Configuration' 'USB3.0 Config in Pre-Boot' is set to 'Enabled'. This must be set to 'Auto', if this option exists. Alternately, using a USB2.0 port may eliminate this issue.Additionally, as the factory hard drive is partitioned as GPT, you must boot from a UEFI boot source to install Windows on a GPT partitioned disk.

Turn on or reboot the computer and tap 'F9' or 'ESC' and then 'F9' when prompted. Highlight the UEFI boot source you are using and press 'ENTER'.I suggest using Windows 7 SP1 for the best installation experience. If the DVD refuses to boot as UEFI, you may need to use a USB Flash drive ( may require DISABLING 'Fast Boot' in the BIOS) as the installation media. Please download the to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid UEFI enabled USB Flash drive if it is formated as NTFS and may require a FAT32 formatted USB Flash drive.

You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using,. Frank. Please click the 'White Kudos' Thumbs Up to say THANKS for helping.

Please click the 'Accept As Solution' on my post, if my help solved your issue. This is a user supported forum. I am a volunteer and I don't work for HP.HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240HP ENVY x360 m6-w103dx - Windows 10, 8GB RAM, Intel HD 520. I got my new 440 G3 last Friday with pre-configured HDD and it run OK. Then I ordered one SSD to upgrade and the nightmare started.I have been using Paragon Hard Disk Manager 15 Suite for a long time. So I user HDM to do:1.

Disk Copy - SSD does not boot2. Create Back Up from HDD and then Restore to SDD - SSD does not bootCalling support for help, then I was told to do a CLEAN installation. I don't get it why there is no way to easily resotre the backup to a new drive, if one day the drive failed and that means there is no way to quickly restore to a new drive which is not the same as the old one.All right, to install Windows 7 became the only choice. Booting up from the installation DVD or even a bootable USB stick, it gives a message all the time exactly the same as yours.

I have struggled since last Saturday.I used to keep backups on two different external storages reduce the risk and hassles if any drive failure happens. However, if to recover the drive becomes a nightmare, then I should really evalute the choice of 440 G3 Never experienced the similar hassles with Asus and Acer NB's, and even upgrade my Mac Book Pro.Sigh. Intel removed USB 2.0 chipset support from the Skylake chipset, therefore normal DVD and USB Windows 7 installs will not work on 6th generation Intel chipsets. You have to add the USB 3.0 drivers into the Windows 7 ISO using this Intel utility;After running this utility and directing it to your Windows 7 ISO, you should be able to install Windows.You may also need to provide the below driver for Windows to see the hard drive. Extract the files onto another usb flash drive without any folders;You may need to install the below driver to make the USB ports usable in Windows;If you have any further questions, please don't hesitate to ask.Please click the white KUDOS star to show your appreciation.

Cara Install Ulang Laptop Asus Windows 7

Frank. Please click the 'White Kudos' Thumbs Up to say THANKS for helping. Please click the 'Accept As Solution' on my post, if my help solved your issue. This is a user supported forum.

I am a volunteer and I don't work for HP.HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240HP ENVY x360 m6-w103dx - Windows 10, 8GB RAM, Intel HD 520. I resolved my problem in using Sandisk Ultra II SSD. After copying HDD to SSD, the system reports no boot device, but in BIOS setup, SSD was detected.HP hotline said I need a clean installation, so I am in this thread.My problem has nothing to do with installation of Windows 7. It is simply an incompatible issue between Sandisk Ultra II and 440 G3, both with the latest firmware. I took another SSD from my Acer and installed it in 440, it booted up I to Windows 10 right away. I then installed Sandisk in Acer, and it also booted up. After I restore the right backups to both SSD, now all run well.As to the installation of Windows 7, I never made it through to update the USB 3.0 support the the USB installation stick.

Cara Install Ulang Windows 7 Pada Laptop Asus

A more easy way would to save the content of the latest USB and AHCIC drivers to a location, I tried to save them in a folder that could be accessed during the installation.During the installation, first I directed to tge x64 folder under USB 3, and then I rescanned to install the base hub. Soon been asked again, I browsed to AHCIC folder, then it should proceed.But I did not install Windows 7 as I have backup ready for restore.Good luck to all.

Hi,i've a new asus x541n that come with an Essential Os. A type of linux/android o.s.i want to try to install windows 7 but actually when i go in te bios, i see the option secure boot disabled but than i can't start with any usb with windows 7, he see only the internal hard disk. I already in new generation laptop that they insert functions that not works. Like some laptop in windows 7 can't use touchpad and in the bios if u put disabled on enabled touchpad nothing change.any tips?anyone had this problem with this laptop?thank you in advance.

Cara Install Ulang Laptop Windows 8

Hi,i've a new asus x541n that come with an Essential Os. A type of linux/android o.s.i want to try to install windows 7 but actually when i go in te bios, i see the option secure boot disabled but than i can't start with any usb with windows 7, he see only the internal hard disk. I already in new generation laptop that they insert functions that not works. Like some laptop in windows 7 can't use touchpad and in the bios if u put disabled on enabled touchpad nothing change.any tips?anyone had this problem with this laptop?thank you in advance. It is probably set to only boot from UEFI devices, which a normal Windows 7 install media is not. Secure Boot has nothing to do with this, you need to find the option to enable the CSM(Compatibility Support Module), that will allow you to use legacy boot devices.

There might not be an option to enable the CSM, I've seen newer computers that did not have that option.And on another note, if that computer has the N4200 processor in it, good luck getting Windows 7 to work on it properly since Intel no longer supports Windows 7 on that processor. Windows 10 will work though, and has the benefit of being natively able to boot with UEFI, so no need for the CSM.